AAC块由飞灰、石灰、水泥和铝粉制成,并有粉碎、测量、混合、倒注、自动化裁剪程序。 AAC块有极轻权、优热绝缘、热绝缘、节能、废物回收利用、方便等优势。

贝特康维托尔(02)Batching机器(03滚动屏幕04GringheadSilo(05)WawCruster(07)Dust抓包机(08)BuckerLime(09)Silo OrightBallMills(11)Silop forFrite(12)CementSilo(13)Sielo(14)Sclever存储机(15)WeighHoper forLime和Cemen(17)FerryCart转Crane(18)19垂直割包机(20)横向割包机转归

技术过程1.First, dose and match measured raw materials;2.After distributing, feed raw material into pouring mixer to make slurry.3.Through thoroughly mixing, the slurry is poured to mould;,4.After pre-curing under acertain temperature and time, the block would reach acertain hardness and prepare for cutting;5.Tilting hoister would turn over 90 degrees of mould;6.Then open the mould and separate it from block.And take the block with side plate to the cutting cart;7.Firstly, the cutting machine vertical cuts blocks from both sides.8.Secondly the horizontal cutting;9.Finally the vertical cutting;10.After cutting, the block is hanged to trolley with side plate by semi-finished product hoister;11.Organizing the cut blocks and put them into autoclaves;12.Hardening the blocks under certain temperature and pressure;13.Carry the finished product out of autoclave14.The finished product hoister take the finished product to stock shield;15.Packed for loading;16.The side plate return back through side plate roller;17.Side plate would be organized with open mould;.18.Clean the mould and prepare for next pouring;19.Steel bars processing line for slab production.

全局服务系统

Qunfeng为110个国家和地区8000名客户提供高效智能制造设备